Comparison of Tab-To-Busbar Ultrasonic Joints for Electric Vehicle Li-Ion Battery Applications

Recent uptake in the use of lithium-ion battery packs within electric vehicles has drawn significant attention to the selection of busbar material and corresponding thickness, which are usually based on mechanical, electrical and thermal characteristics of the welded joints, material availability and cost. To determine joint behaviour corresponding to critical-to-quality criteria, this study uses one of the widely used joining technologies, ultrasonic metal welding (UMW), to produce tab-to-busbar joints using copper and aluminium busbars of varying thicknesses. Joints for electrical and thermal characterisation were selected based on the satisfactory mechanical strength determined from the T-peel tests. Electrical contact resistance and corresponding temperature rise at the joints were compared for different tab-to-busbar joints by passing current through the joints. The average resistance or temperature increase from the 0.3 mm Al tab was 0.6 times higher than the 0.3 mm Cu[Ni] tab, irrespective of busbar selection.