材料科学
微观结构
针状的
合金
层状结构
极限抗拉强度
降水
钛合金
冶金
钛
复合材料
位错
扫描电子显微镜
铝化钛
激光器
沉淀硬化
金属间化合物
融合
拉伸试验
透射电子显微镜
钛粉
原材料
形状记忆合金
超塑性
针状铁素体
作者
Xiang Bai,Muchi Jiang,Hao Chen,Yi Liu,Yusheng Cai,Dechun Ren,Haibin Ji,Jiafeng Lei
标识
DOI:10.1002/adem.202502809
摘要
To address low material utilization, high costs, and lengthy production cycles associated with traditional processing of high‐strength titanium alloys, this study investigates the effects of postheat treatment on the microstructure and properties of Ti‐3Al‐8V‐6Cr‐4Mo‐4Zr (Ti‐38644) titanium alloy fabricated by laser powder bed fusion (PBF‐LB). Ti‐38644 powder is used to prepare specimens via PBF‐LB. Various solution and aging treatments are applied, and the resulting changes are analyzed using optical microscopy, scanning electron microscopy, transmission electron microscopy, X‐ray diffraction, and room‐temperature tensile testing. Solution treatment eliminates molten pool boundaries and substructures in the PBF‐LB‐formed Ti‐38644, increases XRD peak intensity, reduces dislocation density, and enhanced plasticity—elongation increased from 11.9% to 15.5%. Aging induced precipitation of the secondary α phase, increasing strength to 1510 ± 2 MPa. Raising the aging temperature from 500°C to 600°C transformed the α phases from fine acicular to coarse lamellar morphologies, reduced their quantity, decreases strength, and improves plasticity—elongation increased from 4.25 ± 2.5% to 15.5 ± 3.5%. This study is anticipated to provide valuable data and technical support for the engineering application of PBF‐LB‐fabricated Ti‐38644 alloy components in aerospace and related fields.
科研通智能强力驱动
Strongly Powered by AbleSci AI