Why are brittleness and fracability not equivalent in designing hydraulic fracturing in tight shale gas reservoirs

With respect to brittleness, it is about the type of material and its related strength. In comparison with ductile material under load, brittle material has a relatively shorter plastic deformation and responds dominantly by the elastic deformation. With respect to fracability, it is about the rock failure under the ultimate rock strength in either brittle or ductile formation. In comparison, the higher fracable formation should have smaller formation strength than that of the lower fracable formation. In consequence, it is not certain that the brittle formation is easy to fracture than the ductile formation since brittle formation may have greater strength than ductile formation even though the exceptions may exist. More complications arise when evaluating the responses of subsurface formation in great depth to the formation types (e.g. brittle formation or ductile formation). Under this condition, the impact of confinement on the fracability cannot be ignored. In general, the formation subject to higher confinement pressure is more difficult to fracture as the formation strength is greater. Conversely, the formation subject to lower confinement pressure is easy to fracture since the formation strength is smaller. In view of efficient stimulation of tight shale gas reservoirs, it is unclear whether we would choose the brittle interval or the ductile interval to fracture as the strength of either interval is unknown. However, it is apparent that we should choose the formation interval with a higher fracability which is equivalent to the lower formation strength. Under the similar confinements, the lower formation strength may be indicated by the smaller unconfined compressive strength (UCS). As a result, it is advisable that the most fracable interval is the one with lowest UCS. When evaluating the present technology, the formation brittleness should no longer be the associated subject matter as we are unclear about its role to improve the fracability of the tight formation. Disassociating the brittleness with the fracability enables us to focus on identifying the true mechanisms of efficient fracturing of tight shale gas reservoirs. With the objective review and sensible definition of brittleness used in the present petro-physical field to identify the desirable fracturing intervals, the paper presents the ambiguities of using the brittleness to define the formation fracability and points out that the formation brittleness can be unrelated to the formation fracability. As an alternative approach, the paper provides an effective method to define the most fracable formation intervals in designing the hydraulic fracturing in tight shale gas formations.