阳极
丙烷
阴极
堆栈(抽象数据类型)
陶瓷
固体氧化物燃料电池
电解质
材料科学
氧化物
化学工程
部分氧化
开路电压
电极
催化作用
功率密度
电压
化学
复合材料
电气工程
有机化学
功率(物理)
冶金
物理化学
计算机科学
程序设计语言
工程类
物理
量子力学
作者
Bo Liang,Jin Guo,Haiqin Yang,Jiajiang Liang,Zhijiang Zhao,Gang Wu,Yuedong Zhan,Xiuli Zhao,Tao Tao,Yingbang Yao,Sheng‐Guo Lu,Ruirui Zhao
出处
期刊:Applied Energy
[Elsevier BV]
日期:2022-03-01
卷期号:309: 118404-118404
被引量:3
标识
DOI:10.1016/j.apenergy.2021.118404
摘要
A current collecting window (0.4 cm2), without an electrolyte and cathode, is located in the middle of an anode and connected electrically to the cathode of another microtubular solid oxide fuel cell (MTSOFC) when building a short stack. No apparent open-circuit voltage (OCV) drops were observed during 31 thermal cycles for an 8-cell stack using H2 and syngas. Furthermore, 24.1, 53.6 and 103.5 W power levels are achieved employing this current collecting mode at 700 °C for an 8, 10 and 20-cell stack, respectively. The propane-fuelled 8-cell stack has a maximum power density (MPD) of 0.30 W cm−2 when integrated with a catalytic partial oxidation (CPOX) reformer, at a flow rate of 0.32 g min−1 of propane. A Pt-Ru nanoparticle is fabricated by impregnation treatment of the alumina honeycomb ceramic support. The Pt-based catalyst, with an average size of ∼10.0 nm, is well distributed on the surface of the honeycomb ceramic channel. Moreover, Pt-Ru/Al2O3, as a CPOX catalyst, exhibits high propane conversions (94.2%) at 700 °C.
科研通智能强力驱动
Strongly Powered by AbleSci AI