材料科学
闪烁噪声
光电子学
噪音(视频)
微电子
晶体管
凝聚态物理
CMOS芯片
电气工程
电压
物理
噪声系数
计算机科学
图像(数学)
工程类
放大器
人工智能
标识
DOI:10.1109/tns.2015.2405852
摘要
This paper reviews and compares predictions of the Dutta-Horn model of low-frequency excess (1/ f) noise with experimental results for thin metal films, MOS transistors, and GaN/AlGaN high-electron mobility transistors (HEMTs). For metal films, mobility fluctuations associated with carrier-defect scattering lead to 1/f noise. In contrast, for most semiconductor devices, the noise usually results from fluctuations in the number of carriers due to charge exchange between the channel and defects, usually at or near a critical semiconductor/insulator interface. The Dutta-Horn model describes the noise with high precision in most cases. Insight into the physical mechanisms that lead to noise in microelectronic materials and devices has been obtained via total-ionizing-dose irradiation and/or thermal annealing, as illustrated with several examples. With the assistance of the Dutta-Horn model, measurements of the noise magnitude and temperature and/or voltage dependence of the noise enable estimates of the energy distributions of defects that lead to 1/f noise. The microstructure of several defects and/or impurities that cause noise in MOS devices (primarily O vacancies) and GaN/AlGaN HEMTs (e.g., hydrogenated impurity centers, N vacancies, and/or Fe centers) have been identified via experiments and density functional theory calculations.
科研通智能强力驱动
Strongly Powered by AbleSci AI