Mechanical Characterization of SAC Solder Joints at High Temperature Using Nanoindentation

纳米压痕 蠕动 材料科学 焊接 缩进 复合材料 温度循环 冶金 热的 物理 气象学
作者
Sudan Ahmed,Md Hasnine,Jeffrey C. Suhling,Pradeep Lall
出处
期刊: [Institute of Electrical and Electronics Engineers]
卷期号:: 1128-1135 被引量:40
标识
DOI:10.1109/ectc.2017.336
摘要

In this work, we have used nanoindentation methods to explore the creep behavior, and aging effects of SAC305 solder joints at several elevated testing temperatures from 25 to 125 oC. A special high temperature stage and test protocol was used within the nanoindentation system to carefully control the testing temperature, and make the measurements insensitive to thermal drift problems. Solder joints were extracted from 14 × 14 mm PBGA assemblies (0.8 mm ball pitch, 0.46 mm ball diameter) that were built as part of the iNEMI Characterization of Pb-Free Alloy Alternatives Project. Since the properties of SAC solder joints are highly dependent on crystal orientation, polarized light microscopy was utilized to determine the orientation of the tested joints. For all the experiments, only single grain solder joints were used to avoid introducing any unintentional variation from changes in the crystal orientation across the joint cross-section. After extraction, the single grain solder joints were subjected to various aging conditions. Nanoindentation testing was then performed on the aged specimens at five different testing temperatures (T = 25, 50, 75, 100, and 125 oC). In order to understand creep response of the solder joints at different temperatures, a constant force at max indentation was applied for 900 sec while the creep displacements were monitored. With this approach, we were able to measure the creep strain rate as a function of both temperature and prior aging conditions. As expected, our results have shown that indent/testing temperature has a significant impact on the mechanical properties and creep strain rate of solder joints. The measured data have also shown that the effects of aging on solder joints properties become much more significant as the testing temperature increases. In particular, the aging induced degradation rates at high temperatures (100-125 oC) were more than 100X those seen at room temperature. Nanoindentation pile-up effects, although insignificant at room temperature, were observed during high-temperature testing and corrections were made to limit their influence on the test results.
最长约 10秒,即可获得该文献文件

科研通智能强力驱动
Strongly Powered by AbleSci AI
科研通是完全免费的文献互助平台,具备全网最快的应助速度,最高的求助完成率。 对每一个文献求助,科研通都将尽心尽力,给求助人一个满意的交代。
实时播报
CodeCraft的应助被科研通管家采纳,获得10
刚刚
初景的应助被科研通管家采纳,获得20
刚刚
粗犷的翎发布了新的文献求助10
刚刚
丘比特的应助被科研通管家采纳,获得10
刚刚
天天快乐的应助被科研通管家采纳,获得10
1秒前
SciGPT的应助被科研通管家采纳,获得10
1秒前
suhua发布了新的文献求助10
1秒前
1秒前
英姑的应助被科研通管家采纳,获得10
1秒前
喜悦梦凡发布了新的文献求助10
1秒前
molihuakai的应助被Adler采纳,获得10
1秒前
科研通AI2S的应助被科研通管家采纳,获得10
1秒前
发10篇SCI发布了新的文献求助10
2秒前
cmuzf完成签到,获得积分10
2秒前
2秒前
2秒前
2秒前
长聿完成签到 ,获得积分10
2秒前
传奇3的应助被Adler采纳,获得10
2秒前
3秒前
3秒前
田様的应助被Adler采纳,获得10
4秒前
科目三的应助被Adler采纳,获得10
5秒前
genius_yue发布了新的文献求助10
6秒前
6秒前
Zhang完成签到,获得积分10
6秒前
6秒前
我是老大的应助被Adler采纳,获得10
6秒前
7秒前
桐桐的应助被刘秋白采纳,获得50
8秒前
经十路以东的应助被Adler采纳,获得10
8秒前
阳光项链发布了新的文献求助10
8秒前
Link完成签到 ,获得积分10
9秒前
酷波er的应助被害羞白云采纳,获得10
9秒前
xx完成签到,获得积分10
10秒前
沉静傥完成签到,获得积分10
11秒前
科研若至发布了新的文献求助10
11秒前
李劳模完成签到,获得积分10
12秒前
12秒前
乐乐的应助被zheng-homes采纳,获得30
12秒前
高分求助中
(应助此贴封号)【重要!!请各用户(尤其是新用户)详细阅读】【科研通的精品贴汇总】 10000
拉伸高分子熔体中缠结行为的模拟和小角中子散射研究 2000
Handbook of Sport Coaching Research 1000
Orthognathic Surgery - 2 Volume Set 500
高分子基功能界面水蒸发材料与应用研究 500
外场增强的水汽发电研究 500
基于结构调控的功能化水诱导发电材料与器件研究 500
热门求助领域 (近24小时)
化学 材料科学 医学 生物 纳米技术 计算机科学 工程类 有机化学 化学工程 生物化学 物理 复合材料 内科学 催化作用 光电子学 人工智能 细胞生物学 无机化学 物理化学 数学
热门帖子
关注 科研通微信公众号,转发送积分 8194041
求助须知:如何正确求助?哪些是违规求助? 9579979
关于积分的说明 21868799
捐赠科研通 7793641
什么是DOI,文献DOI怎么找? 3437477
关于科研通互助平台的介绍 2560942
邀请新用户注册赠送积分活动 2484251