陀螺仪
加速度计
惯性测量装置
校准
计算机科学
磁强计
方向(向量空间)
可观测性
控制理论(社会学)
计算机视觉
人工智能
工程类
物理
数学
航空航天工程
控制(管理)
量子力学
操作系统
磁场
应用数学
几何学
作者
Jacky Chow,Jeroen D. Hol,Henk Luinge
出处
期刊:Drones
[Multidisciplinary Digital Publishing Institute]
日期:2018-02-09
卷期号:2 (1): 6-6
被引量:24
标识
DOI:10.3390/drones2010006
摘要
Inertial measurement units (IMUs) are fundamental for attitude control of drones. With the advancements in micro-electro-mechanical systems (MEMS) fabrication processes, size, power consumption, and price of these sensors have reduced significantly and attracted many new applications. However, this came at the expense of sensors requiring frequent recalibration, as they are highly contaminated with systematic errors. This paper presents a novel method to jointly calibrate the accelerometer, gyroscope, and magnetometer triad in a MEMS IMU without additional equipment. Opportunistic zero change in velocity and position updates, and inclination updates were used in conjunction with relative orientation updates from magnetometers in a robust batch least-squares adjustment. Solutions from the proposed self-calibration were compared to existing calibration methods. Empirical results suggest that the new method is robust against magnetic distortions and can achieve performance similar to a specialized calibration that uses a more accurate (and expensive) IMU as reference. The jointly estimated accelerometer and gyroscope calibration parameters can deliver a more accurate dead-reckoning solution than the popular multi-position calibration method (i.e., 54% improvement in orientation accuracy) by recovering the gyroscope scale error and other systematic errors. In addition, it can improve parameter observability as well as reduce calibration time by incorporating dynamic data with static orientations. The proposed calibration was also applied on-site pre-mission by simply waving the sensor by hand and was able to improve the orientation tracking accuracy by 73%.
科研通智能强力驱动
Strongly Powered by AbleSci AI