材料科学
薄膜
介电谱
溅射沉积
析氧
氧气
拉曼光谱
循环伏安法
扫描电子显微镜
退火(玻璃)
化学工程
分解水
分析化学(期刊)
光电流
光电化学
电化学
溅射
氧化物
沉积(地质)
无机化学
氢
腔磁控管
作者
Helen Caroline de Souza Barros,David Alexandro Graves,Benedito Donizeti Botan-Neto,Rafael da Silva Leal,Marcilene Cristina Gomes,Douglas Marcel Gonçalves Leite,Elizabete Yoshie Kawachi,Rodrigo Sávio Pessoa,Nicolas Martin,Argemiro Soares da Silva Sobrinho,A. L. J. Pereira
出处
期刊:
[Wiley]
日期:2026-01-29
卷期号:5 (3): e00188 (15)-
被引量:2
标识
DOI:10.1002/apxr.202500188
摘要
The growing need for sustainable energy sources to replace fossil fuels has led to the exploration of green hydrogen production. Photoelectrochemical (PEC) water splitting, utilizing photoanodes composed of semiconductors such as WO 3 , presents a promising solution. In this work, WO 3‐x thin films were deposited by DC reactive magnetron sputtering, and the effect of oxygen flow ramping during deposition on the films' structural, optical, and photoelectrochemical properties was investigated. The films exhibited the monoclinic γ‐WO 3 phase, with changes in their structural properties observed through X‐ray diffraction (XRD), Raman spectroscopy, and scanning electron microscopy (SEM). Transmittance measurements confirmed that films grown under low oxygen flow were visually opaque and dark. In contrast, those grown under intermediate to high oxygen flow rates exhibited significantly higher transparency, consistent with lower oxygen‐vacancy concentrations. Electrochemical impedance spectroscopy (EIS) and cyclic voltammetry (CV) revealed enhanced charge transfer and photoactivity in samples with intermediate oxygen flow rates. The results suggest that oxygen vacancy engineering, combined with precise control of deposition conditions, significantly enhances the photoelectrochemical performance of WO 3‐x films. The study also highlights the importance of post‐deposition annealing conditions for optimizing the material's photoelectrochemical response.
科研通智能强力驱动
Strongly Powered by AbleSci AI