材料科学
电镀(地质)
拉伤
电池(电)
锂(药物)
复合材料
应变率
光电子学
工作(物理)
电化学
光纤布拉格光栅
变形(气象学)
锂离子电池
二极管
锂电池
石墨
降级(电信)
作者
Fan Zhang,Di Lu,Peitao Xiao,Xianxian Shi,Shu Hong,Yufang Chen
出处
期刊:Nano Research
[Springer Science+Business Media]
日期:2026-04-23
卷期号:19 (9): 94908758-94908758
标识
DOI:10.26599/nr.2026.94908758
摘要
Abstract Real-time detection of lithium plating under extreme conditions is critical for battery safety. Here, we use embedded fiber Bragg grating (FBG) sensors to achieve real-time monitoring of mechanical strain evolution in operating graphite pouch cells. At ultralow temperatures (−20 and −30 °C), we observe an anomalous suppression in differential strain (dε/dQ) during late-stage charging. Specifically, the strain generation rate is severely constrained, dropping to approximately 0.1 με·mAh−1 (με = 10−6 strain) at high state-of-charge (SOC)—a stark contrast to the normal intercalation baseline of ~ 0.3 με·mAh−1 observed under milder, non-plating conditions. Through synchronized electrochemical analysis and post-mortem characterization, we show that this mechanical anomaly reflects a fundamental shift in plating behavior: At cryogenic temperatures, internal mechanical constraints imposed by prior plating and solid electrolyte interphase (SEI) densification suppress further expansion, altering the progression of lithium deposition. The real-time strain signals also reveal a dynamic competition between SEI fracture–repair cycles and lithium re-plating, providing insight into coupled degradation mechanisms governing battery failure. This work establishes an in-situ diagnostic tool for battery failure and offers new mechanistic understanding of lithium plating under extreme conditions.
科研通智能强力驱动
Strongly Powered by AbleSci AI