材料科学
石墨烯
极限抗拉强度
化学气相沉积
氧化物
锌
粘结强度
生物相容性
复合材料
纳米技术
化学工程
冶金
胶粘剂
工程类
图层(电子)
作者
Youwen Yang,Yun Cheng,Mingli Yang,Guodong Qian,Shuping Peng,Fangwei Qi,Cijun Shuai
标识
DOI:10.1016/j.mtnano.2021.100163
摘要
Reduced graphene oxide (RGO) shows great advantages as nano reinforcement for zinc (Zn)-based implants owing to its excellent fracture strength, large specific surface area, and good biocompatibility. Nevertheless, the poor interfacial bonding between Zn matrix and RGO impairs the strengthening efficiency. In this work, titanium carbide (TiC) was used as an interface bridging between Zn matrix and RGO to improve the interface adhesion. On the one hand, TiC was in-situ generated on RGO plane through chemical vapor deposition and tightly integrated together via chemical bond. On the other hand, a semicoherent bonding was formed between TiC and Zn matrix because of the small lattice misfit and similar atomic arrangement between the (200)Zn plane and (002)TiC plane. The results showed that [email protected] offered an improved strengthening efficiency with tensile strength of scaffolds increasing from 30.6 to 59.9 MPa, as the TiC nanoparticles considerably enhanced the load transfer strengthening of RGO and contributed an Orowan strengthening. Significantly, it also improved the plasticity of Zn scaffolds because the semicoherent structure inhibited the premature stress concentration and dislocation accumulation. Moreover, [email protected] promoted the cell differentiation behavior of Zn scaffolds.
科研通智能强力驱动
Strongly Powered by AbleSci AI