Progress and Outlook of 10% Efficient AlGaN‐Based (290‐310 nm)‐Band UVB LEDs

Eco‐friendly and low‐cost aluminum gallium nitride (AlGaN) for the epitaxial growth of ultraviolet‐B (UVB) light‐emitting diodes (LEDs) on c‐Sapphire has the possibility of high external‐quantum efficiency (EQE). In this review paper a special growth techniques for 50% relaxed and 4 μm thick AlGaN buffer layer underneath the multi‐quantum wells (MQWs) are challenged to achieve a maximum internal‐quantum efficiency of 50–57% in 310–290 nm band UVB LEDs. The influence of a thin “Valley” layer in p‐type multi‐quantum barrier electron‐blocking layer on 2D hole generation and injection via intraband tunneling was attempted. Finally, the influence of soft polarized Mg‐doped p‐type Al‐graded AlGaN hole injection layer assisted by excimer laser annealing for better hole injection toward the MQWs was investigated and quite high hole concentration of 2 × 10 16 cm −3 and resistivity of 24 Ω‐cm at room temperature was achieved. Consequently, the EQE of transparent 310 and 304 nm UVB LEDs, respectively, reached to a confirmed world record values of ≈5% and ≈10% with light powers of 29 and 40 mW on wafer. This EQE value can surpass 21% if flip‐chip, nanoPSS, photonic crystal, and lens with highly reflective p‐electrodes are incorporated in LED.