Adsorption of Phosphate by Two-Step Synthesis of Ceramsite from Electrolytic Manganese Residue/Dredged Sludge

Carrying out research on the management of electrolytic manganese residue (EMR) is necessary to maintain the environment and human health. The dredged sludge (DS) and water hyacinth (WH) generated from dredging projects are potential environmental threats, and therefore suitable methods need to be found for their treatment. In this study, ceramsite was prepared by a two-step low-temperature firing method using DS and EMR as raw materials, WH as a pore-forming additive, and aluminate cement as a binder for the adsorption of phosphorus from wastewater. The optimal ratio and process parameters of the ceramsite were determined by mechanical and adsorption properties. The static adsorption experiments were conducted to study the effect of ceramsite dosage and solution pH on the removal of phosphorus. At the same time, dynamic adsorption experiments were designed to consider the influence of flow rate on its actual absorption effect, to explore the actual effect of ceramsite in wastewater treatment, and to derive a dynamic adsorption model that can provide technical support and theoretical guidance for environmental management.