Halide Ordering Enables Superior Charge Transport in 3D (NMPDA)Pb2I4Br2 Perovskitoid Single Crystal

Halide composition engineering has been demonstrated as an effective strategy for optical and electronic properties modulation in 3D perovskites. While the impact of halide mixing on the structural and charge transport properties of 3D perovskitoids remains largely unexplored. Herein, it is demonstrated that bromine (Br) mixing in 3D (NMPDA)Pb2 I6 (NMPDA = N-methyl-1,3-propane diammonium) perovskitoid yields stabilized (NMPDA)Pb2 I4 Br2 with specific ordered halide sites, where Br ions locate at the edge-sharing sites. The halide ordered structure enables stronger H-bonds, shorter interlayer distance, and lower octahedra distortion in (NMPDA)Pb2 I4 Br2 with respect to the pristine (NMPDA)Pb2 I6 . These attributes further result in high ion migration activation energy, low defect states density, and enhanced carrier mobility-lifetime product (µτ), as underpinned by the electrical properties investigation and DFT calculations. Remarkably, the parallel configured photodetector based on (NMPDA)Pb2 I4 Br2 single crystal delivers a high on/off current ratio of 3.92 × 103 , a satisfying photoresponsivity and detectivity of 0.28 A W-1 and 3.05 × 1012 Jones under 10.94 µW cm-2 irradiation, superior to that of (NMPDA)Pb2 I6 and the reported 3D perovskitoids. This work sheds novel insight on exploring 3D mixed halide perovskitoids toward advanced and stable optoelectronic devices.