双稳态
带宽(计算)
悬臂梁
能量收集
刚度
频率响应
结构工程
控制理论(社会学)
功率(物理)
材料科学
声学
工程类
物理
电气工程
计算机科学
光电子学
控制(管理)
量子力学
人工智能
电信
作者
Mostafa Shahsavar,Mohammad Reza Ashory,Mohammad Mahdi Khatibi
标识
DOI:10.1177/1045389x221115703
摘要
In this paper, a novel energy harvester is proposed by adding a barrier to a typical bistable energy harvester, which is modeled exploiting an equivalent single degree of freedom. By using Euler-Lagrange equations, mass, structural stiffness, magnetic force and electromechanical coupling coefficient of the harvester, are converted to an equivalent SDOF model. The frequency bandwidth of the system and the level of harvested power in impacting and non-impacting conditions are obtained. According to the numerical results, it is found by adding a barrier to a typical bistable energy harvester, the working frequency bandwidth of the system is increased tangibly. In fact, by vibro-impact phenomenon, the working frequency bandwidth and extracted power of the system are increased about 42.95% and more than 7 times, respectively. Additionally, the effects of stiffness and initial gap of the barrier are shown on frequency bandwidth of the harvester. It is observed that the gap distance has more effect on widening frequency bandwidth of the system against barrier stiffness. Finally, the effect of the electrical load resistance on the harvested power is discussed at various barrier stiffnesses and initial gap distances and finally the optimum values of the electrical load are provided for each condition.
科研通智能强力驱动
Strongly Powered by AbleSci AI