级配
材料科学
热等静压
复合材料
粒子(生态学)
紧迫的
热压
机制(生物学)
烧结
计算机科学
认识论
计算机视觉
海洋学
哲学
地质学
作者
Kun Cheng,Yudong Cao,Yuhan Jiang,Xiangyun Gao,Guizhou Liu,Chunmao Tian,Chao Cai,Yusheng Shi
标识
DOI:10.1016/j.matdes.2024.113537
摘要
High-volume fraction SiCp/Al composites are widely used in aerospace, optical, and electronic packaging industries due to their high specific strength, superior specific stiffness, and low coefficient of thermal expansion. Hot isostatic pressing (HIP), as a near-net shaping process, enables a low-cost fabrication of difficult-to-machine composites with complex shapes and high performance. This paper investigates the effects of SiCp gradation (with 40 μm:10 μm ratios of 1:0, 3:1, 2:1, 1:1, 1:2, 1:3, and 0:1) on the microstructure, relative density, and thermal and mechanical properties of 55 vol% SiCp/6061Al composites during semi-solid HIP. Results show that the SiC11/6061Al (with 40 μm:10 μm ratio of 1:1) sample achieves a high relative density (99.07 %) and demonstrates excellent mechanical performance (ultimate tensile strength of 373.09 MPa and Young’s modulus of 188.62 GPa). Compared to other engineering materials, this composite offers significantly higher specific stiffness and specific strength while maintaining favorable thermal conductivity and a low coefficient of thermal expansion. Finite element simulation of uniaxial tensile behavior indicates that powder gradation optimizes load transfer. This work provides guidance for HIP forming of high-performance 55 vol% SiCp/6061Al composite components.
科研通智能强力驱动
Strongly Powered by AbleSci AI