Simulations on Evacuation Strategy and Evacuation Process of the Subway Train Under the Fire

This study focuses on the safe evacuation strategy and evacuation process in the subway train under the fires. The subway station evacuation mode should be adopted if the power system of a subway train is normal on fire. While, the tunnel evacuation mode should be adopted if the power system of the train fails because of the effects of fire. Under the tunnel evacuation mode, the direction of tunnel smoke should be opposite to that of most passengers, and passengers should be evacuated toward the fresh wind. By using the numerical simulation software Pathfinder and PyroSim, the passenger evacuation time under different conditions is calculated, and the safety of the evacuation process is evaluated. The results show that the evacuation time of the station evacuation mode is obviously shorter than that of the tunnel evacuation mode. With the same conditions, the evacuation time of the tunnel evacuation mode is 2193 s, which is about four times as much as the evacuation time of the station evacuation mode (526 s). The total evacuation time increases with the total number of passengers and the proportion of older people and children. Under an oil pool fire, which is an extreme fire condition, the fire environment inside the train may reach a level threatening the passengers’ safety before the evacuation is complete, even before the door opens; therefore, special attention should be paid to the safety issues in stage from the fire begins to the evacuation complete.