Analyzing track sprint cyclists' performances using position-specific maximal-torque and power-cadence relationships

Previous studies have demonstrated the importance of maximal Torque-Cadence (T-C) and Power-Cadence (P-C) relationships, for the performances of world class track sprint cyclists. If these relationships are affected by the function of the lower limb muscles, the ability of cyclists to generate torque and power at a given cadence may vary depending on their riding position. During sprint events (individual and team sprints and Keirin), cyclists alternate between standing and seated positions. The T-C and P-C relationships may change with the position adopted by the cyclists. PURPOSE: The aim of this study was to evaluate the necessity to define position specific maximal T-C and P-C relationships. METHODS: Eight junior elite track cyclists from the National Talent Identification squad undertook two inertial-load tests that consisted of four all-out sprints each. One test was undertaken at the velodrome in a standing position on a carbon fibre track bike, and the other test was completed in a seated position on an air-braked stationary ergometer. A calibrated SRM power meter interfaced to a custom instrumentation package was used for all mechanical measurements. Maximal T-C and P-C relationships were analysed to calculate maximal Torque (T0), maximal Power (Pmax) and optimal pedalling cadence (PCopt). RESULTS: All individual T-C and P-C relationships obtained for both body positions were fitted by linear regressions (r2=0.95 ± 0.02) and second order polynomials (r2=0.96 ± 0.01), respectively. T0 was higher (209 ± 2.2N.m vs. 177.0 ± 3.9N.m, p