Analysis of high temperature effects on piezoelectric based ultrasonic transducers

作者
Prathamesh N. Bilgunde
标识
DOI:10.31274/etd-180810-5947
摘要

Under sodium viewing (USV) using ultrasonic pulse-echo techniques offers the potential for the inspection of generation IV, liquid sodium-cooled fast reactors (SFRs) at the hot stand-by temperature (260C). However, the harsh environment effects on the transducer reduce the ultrasonic signal strength which also limits the probability of detection (POD) of the defects.\nCurrent work presents a unified modeling and measurement-based methodology to analyze the high temperature effects on the transducer components. Resonance analysis-based characterization has shown that the conventional d33 piezoelectric parameter is not a sufficient condition to estimate resonance characteristics of high temperature ultrasonic transducers. A full piezoelectric material matrix needs to be utilized in order to estimate high temperature performance. In seeking materials, BiScO3-PbTiO3 (Bismuth Scandium oxide-lead titanate) is demonstrated to be the piezoelectric material that could potentially be used for hot stand-by mode (260C) inspection of SFRs.\nHowever, a high temperature ultrasonic transducer is also a multi-layer system where the interaction of multiple acoustic layers is equally important as the temperature dependence of a single piezoelectric layer. A 3-layer problem was studied which demonstrated the thermal cycling effect on the interfaces, evident from the echo amplitudes and bandwidth of the frequency response up to 260C. A unique bi-modal resonance phenomenon was also found in the transducer due to interaction of the multiple acoustic layers.\nUtilizing these insights, design, development and high temperature evaluation of several prototypes was performed in surrogate fluids. This resulted in an air-backed transducer using BS-PT piezoelectric material, nickel faceplate, and liquid acoustic coupling with silicone oil. The transducer demonstrated the ability for imaging regions of different thickness within the specimen, critical for USV capabilities in SFRs.\nCurrent work also developed a cost effective, novel temperature compensated transfer function approach to predict POD at high temperature using room temperature experimental data. Such a model-assisted POD approach quantified effect of temperature dependence of PZT-5A material on POD near 200C. This approach could be extended for other high temperature transducer materials using a physics based-model and room temperature experimental data to estimate high temperature POD.

科研通智能强力驱动
Strongly Powered by AbleSci AI
科研通是完全免费的文献互助平台,具备全网最快的应助速度,最高的求助完成率。 对每一个文献求助,科研通都将尽心尽力,给求助人一个满意的交代。
实时播报
余香的应助被yy采纳,获得10
刚刚
yuchuncheng完成签到,获得积分0
1秒前
gycao2025发布了新的文献求助10
1秒前
lzl007完成签到 ,获得积分0
3秒前
3秒前
Yolo完成签到 ,获得积分20
5秒前
特特特特特完成签到,获得积分10
5秒前
哈基米这一块完成签到,获得积分10
5秒前
Fly完成签到,获得积分10
5秒前
5秒前
胡杨树2006完成签到,获得积分10
6秒前
Fan完成签到 ,获得积分0
6秒前
椰子云的应助被邢一采纳,获得10
6秒前
冷cool完成签到,获得积分10
7秒前
Lucas完成签到,获得积分10
7秒前
7秒前
7秒前
dd完成签到,获得积分10
7秒前
毛啊毛完成签到,获得积分10
9秒前
9秒前
森林木发布了新的文献求助10
9秒前
qhebdb完成签到 ,获得积分10
10秒前
米豆完成签到 ,获得积分10
11秒前
123456qqqq发布了新的文献求助50
11秒前
dd发布了新的文献求助10
11秒前
11秒前
锦诗完成签到,获得积分10
12秒前
贪玩的水壶完成签到 ,获得积分10
12秒前
762323661完成签到,获得积分10
12秒前
wtian1221完成签到,获得积分10
13秒前
Nidhogg完成签到,获得积分10
13秒前
deer完成签到,获得积分10
13秒前
leave完成签到,获得积分10
14秒前
CarryLJR发布了新的文献求助10
14秒前
会盟发布了新的文献求助10
14秒前
14秒前
zs关闭了zs的文献求助
15秒前
DavidSun完成签到,获得积分10
15秒前
wwwww完成签到,获得积分10
15秒前
上官若男的应助被Loooong采纳,获得10
16秒前
高分求助中
(应助此贴封号)【重要!!请各用户(尤其是新用户)详细阅读】【科研通的精品贴汇总】 10000
拉伸高分子熔体中缠结行为的模拟和小角中子散射研究 1500
The World Atlas of Wine 9th edition 1000
奈特基础组织学:配套组织病理学(第4版)(Netter's Essential Histology With Correlated Histopathology) 800
John McDowells Bildungstheorie 800
八旗制度の研究 600
Analyses de reconnaissances de dettes passées devant les échevins d'Ypres (1249-1291) 600
热门求助领域 (近24小时)
化学 材料科学 医学 生物 纳米技术 计算机科学 工程类 有机化学 化学工程 生物化学 物理 复合材料 内科学 催化作用 光电子学 人工智能 细胞生物学 无机化学 物理化学 数学
热门帖子
关注 科研通微信公众号,转发送积分 8159151
求助须知:如何正确求助?哪些是违规求助? 9554617
关于积分的说明 21719982
捐赠科研通 7748814
什么是DOI,文献DOI怎么找? 3427149
关于科研通互助平台的介绍 2552091
邀请新用户注册赠送积分活动 2471436