微观结构
材料科学
电介质
电极
母材
基础(拓扑)
接口(物质)
冶金
金属
复合材料
光电子学
化学
物理化学
数学分析
数学
毛细管数
毛细管作用
焊接
作者
Kun-Hsu Lee,Yu‐Chuan Wu,Hong‐Yang Lu
标识
DOI:10.1088/0022-3727/40/16/022
摘要
The interface microstructure in a simulated sandwich structure of Ni base-metal electrode and BaTiO 3 dielectric has been studied by transmission electron microscopy. Some Ni grains have been oxidized to NiO; most of them although coarsened and poorly densified remained Ni metal. NiO formed during the reoxidation step at 1000 °C because the partial pressure of oxygen ( p O 2 ≈ 10 −6 atm) in the controlled-sintering atmosphere was higher than the thermodynamic equilibrium value of p O 2 = 4.68 × 10 −11 atm. Crystallographic orientation relationships between NiO and BaTiO 3 at the interface were determined. The BaTiO 3 –NiO interface was both twist and tilt boundaries that are characterized by dislocations of a mixed nature with Burgers vectors b = ½ ⟨0 0 1⟩ and ½ ⟨1 1 0⟩ and ⟨1 1 1⟩, described in the indices of pseudo-cubic BaTiO 3 . Dislocation loops were also found in BaTiO 3 as well as along the NiO–BaTiO 3 interface; the latter with was a vacancy loop formed by condensation of intrinsic Schottky defects. The Ni–BaTiO 3 interface is built on and a configuration with opposite-charged ions stacked upon each other was energetically more favourable. The lattice mismatch was accommodated by misfit partials with b = ½ ⟨1 1 0⟩ that were dissociated from perfect dislocations with b = ⟨1 1 0⟩ probably by glide in on the metal–dielectric interface.
科研通智能强力驱动
Strongly Powered by AbleSci AI