环氧树脂
缩水甘油醚
材料科学
复合材料
剥脱关节
表面改性
玻璃化转变
动态力学分析
热稳定性
氧化物
石墨烯
极限抗拉强度
断裂韧性
双酚A
聚合物
化学工程
纳米技术
冶金
工程类
作者
Yan-Jun Wan,Long‐Cheng Tang,Li‐Xiu Gong,Dong Shen Yan,Yi Bao Li,Lianbin Wu,Jian Xiong Jiang,Guo Qiao Lai
出处
期刊:Carbon
[Elsevier BV]
日期:2013-12-21
卷期号:69: 467-480
被引量:805
标识
DOI:10.1016/j.carbon.2013.12.050
摘要
Abstract Epoxy composites filled with both graphene oxide (GO) and diglycidyl ether of bisphenol-A functionalized GO (DGEBA–f–GO) sheets were prepared at different filler loading levels. The correlations between surface modification, morphology, dispersion/exfoliation and interfacial interaction of sheets and the corresponding mechanical and thermal properties of the composites were systematically investigated. The surface functionalization of DGEBA layer was found to effectively improve the compatibility and dispersion of GO sheets in epoxy matrix. The tensile test indicated that the DGEBA–f–GO/epoxy composites showed higher tensile modulus and strength than either the neat epoxy or the GO/epoxy composites. For epoxy composite with 0.25 wt% DGEBA–f–GO, the tensile modulus and strength increased from 3.15 ± 0.11 to 3.56 ± 0.08 GPa (∼13%) and 52.98 ± 5.82 to 92.94 ± 5.03 MPa (∼75%), respectively, compared to the neat epoxy resin. Furthermore, enhanced quasi-static fracture toughness ( K IC ) was measured in case of the surface functionalization. The GO and DGEBA–f–GO at 0.25 wt% loading produced ∼26% and ∼41% improvements in K IC values of epoxy composites, respectively. Fracture surface analysis revealed improved interfacial interaction between DGEBA–f–GO and matrix. Moreover, increased glass transition temperature and thermal stability of the DGEBA–f–GO/epoxy composites were also observed in the dynamic mechanical properties and thermo-gravimetric analysis compared to those of the GO/epoxy composites.
科研通智能强力驱动
Strongly Powered by AbleSci AI