材料科学
微观结构
复合材料
冶金
开裂
图层(电子)
激光器
合金
包层(金属加工)
作者
Song Wulin,J. Echigoya,Zhu Beidi,Xie Changsheng,Cui Kun
标识
DOI:10.1016/s0257-8972(00)01168-3
摘要
Abstract The laser cladding of self-fluxing Fe–Cr–Ni alloys on a medium carbon steel substrate was performed using a CO 2 laser and Ar shielding gas that was blown into a molten pool. The cracking susceptibility and microstructure of the laser-clad layer were studied in terms of Co additions. Co can change the microstructure of a Fe–Cr–Ni alloy clad layer from eutectic to hypoeutectic and decrease the cracking susceptibility of clad layers. However, these results relate not only to the Co content in the laser-clad alloys, but also the number of overlapping tracks. With the increment of Co content in clad layer, the cracking susceptibility of the laser cladding layer decreases and the number of overlapping tracks with hypoeutectic structure increases. At the same time, Co does not change the hardness of the clad layer.
科研通智能强力驱动
Strongly Powered by AbleSci AI