聚碳酸酯
材料科学
聚合物
聚合
热稳定性
无定形固体
高分子化学
差示扫描量热法
预聚物
双酚
动态力学分析
摩尔质量分布
化学工程
复合材料
化学
有机化学
环氧树脂
聚氨酯
物理
热力学
工程类
作者
In Hak Baick,Woo Jic Yang,Yun Gyong Ahn,Kwang Ho Song,Kyu Yong Choi
摘要
The structure and properties of ultrahigh molecular weight polycarbonate synthesized by solid‐state polymerization in micro‐layers (SSPm) are reported. A low molecular weight prepolymer derived from the melt transesterification of bisphenol A and diphenyl carbonate as a starting material was polymerized to highly amorphous and transparent polycarbonate of molecular weight larger than 300,000 g mol−1 in the micro‐layers of thickness from 50 nm to 20 µm. It was observed that when the polymerization time in micro‐layers was extended beyond conventional reaction time, insoluble polymer fraction increased up to 95%. Through the analysis of both soluble and insoluble polymer fractions of the high molecular weight polycarbonate by 1H NMR spectroscopy and pyrolysis‐gas chromatography mass spectrometry (Py‐GC/MS), branches and partially crosslinked structures have been identified. The thermal, mechanical and rheological properties of the ultra‐high molecular weight nonlinear polycarbonates synthesized in this study have been measured by differential scanning calorimetry (DSC), dynamic mechanical analysis (DMA), and rheometry. The nonlinear chain structures of the polymer have been found to affect the polymer's thermal stability, mechanical strength, shear thinning effect, and elastic properties. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015, 132, 41609.
科研通智能强力驱动
Strongly Powered by AbleSci AI