Nickel supported on various metallic oxides was prepared by impregnation method,and used for selective hydrogenation of furfural to furfural alcohol in a 100 mL stainless steel autoclave lined with quartz glass with mechanical stirrer.The Ni/γ-Al2O3 samples were characterized by X-ray Diffraction(XRD) and Temperature-Programmed Reduction(TPR).It was found that nickel could disperse highly on the surface of γ-Al2O3 within the nickel loadings of 5~15% and aggregate over 20%Ni/γ-Al2O3.The increase of calcination temperatures promoted the dispersion of nickel through decomposes of nickel hydroxides to nickel oxides.Results of TPR indicated the existence of strong interactions between the metal and support,and the interactions decreased with the increase of nickel loadings.Moreover,the calcination temperatures could promote the interactions due to the highly dispersion of nickel at higher calcined temperature.Some acitivity and high selectivity to furfural alcohol was found in hydrogenation of furfural over 10%Ni/γ-Al2O3 because of the large surface and appropriate surface structures of γ-Al2O3.In addition,hydrogenation of furfural in nonpolar solvent such as cyclohexane exhibited higher selectivity to furfural alcohol comparing to ethanol,due to the elimination of acetals between the reaction of furfural and ethanol.