Introduction In discussing wood moisture relations the technical term which is most frequently encountered is equilibrium moisture content, usually referred to as E.M.C. Equilibrium moisture content is defined as the moisture content which wood will attain in equilibrium with a given temperature and relative humidity. This is an extremely useful concept and finds widespread use in dealing with wood. It is so well established, in fact, that a given set of temperature and relative humidity conditions is often referred to as an E.M.C. condition of so many percent--meaning that in this set of conditions wood will attain a predetermined moisture content. From the foregoing it is clear that two of the factors which will influence E.M.C. are temperature and relative humidity. In practical application, these are usually assumed to be the only factors. Although this assumption is justified, there are nevertheless several other factors which can also influence equilibrium moisture content. One of these is that we are dealing with wood, a biological material, which has a great deal of inherent variation. We can never expect one individual piece of wood to behave exactly like any other piece. Another factor is the species of wood which we are dealing with. Although the influence of species is not very pronounced and may be overshadowed by the variation within one species, these differences nevertheless exist. And finally, a factor which cannot be entirely discounted is sorption hysteresis. The present discussion will be devoted to this factor. The word hysteresis is derived from the Greek word hysterein, meaning to be behind; to lag. There are a number of different hysteresis effects. Perhaps the best known of these is the hysteresis encountered in electromagnetism. The