摘要
In recent years, significant progress has been made in the material and structural innovations of flexible strain sensors. However, current research primarily focuses on single performance metrics (such as sensitivity or measurement range), lacking a systematic and comprehensive evaluation of key parameters for engineering applications, including response speed, hysteresis, stability, noise levels, and measurement precision. These parameters are essential for practical reliability and exhibit intrinsic physical interdependencies and mutual constraints, leading to difficult trade-offs that complicate overall technological advancement. To address these challenges, this work proposes a geometric design scheme based on liquid metal (LM) flow and a V-shaped pre-compression channel. By establishing the sensing mechanism on rapid and reversible cross-sectional variation of a conductive fluid, circumventing inherent problems in solid materials such as irreversible deformation, random noise, and significant hysteresis from a fundamental physical perspective. The introduction of microchannel structure for the micrometer-scale V-shaped LM enables simultaneous reduction in both transverse and longitudinal cross-sectional areas during deformation, significantly enhancing the volumetric change rate of the conductive pathway. This achieves comparable strain sensitivity (Gauge Factor (GF) = 141.2 at 10% strain). Building upon this foundation, the proposed sensor's performance metrics are systematically quantified, achieving specifications of 20,000 Hz, 100,000 stable cycles, 0.72% hysteresis, 0.0036% strain resolution, and 0.66% precision. The proposed sensor has shown great potential as a reliable component in applications such as healthcare, audio analysis, and structural health monitoring.