材料科学
压延
阴极
复合材料
硫化物
电池(电)
涂层
财产(哲学)
硫化铜
冶金
制动器
化学工程
作者
Finn Frankenberg,Caroline Willuhn,Philipp Haase,Carina Heck,Arno Kwade
标识
DOI:10.1016/j.ensm.2026.105661
摘要
This study investigates the numerical modelling of the calendering process and its effect on the microstructure, transport properties and electrochemical performance of dry coated Li 6 PS 5 Cl (LPSCl)-based solid state battery (SSB) cathodes. Calendering was simulated using the discrete element method (DEM) with three different LPSCl particle sizes (small (S), medium (M), and large (L)), by combining the elasto-plastic Thornton-Ning model with the adhesive Johnson-Kendall-Roberts model. Model parameters were calibrated using experimental microindentation, and calendering simulations were validated by comparing them with porosities of experimentally produced SSB cathodes. The DEM structures were further evaluated in terms of their contact numbers and effective transport properties, both of which show an increase with higher calendering degrees. Electronic conductivity is lowest for small LPSCl, which stems from the shielding of NCM particles and non-percolating electronic paths through carbon black, due to the large number of LPSCl particles. The ionic conductivity is highest for the small LPSCl particles, which results from more LPSCl-interparticle contacts, leading to a larger number of ionic pathways and thus, lower tortuosity. Electrochemical cycling simulations over a range of C-rates reveal that higher degrees of compaction and medium LPSCl particle sizes lead to the best electrochemical performance, which is attributed to the structure’s optimal combination of electronic and ionic conduction properties at the given weight ratio of materials. In summary, this study presents a simulation-based workflow that investigates the microstructural changes during calendering of sulfide SSB cathodes, correlating processing conditions with microstructure, transport properties, and electrochemical performance.
科研通智能强力驱动
Strongly Powered by AbleSci AI