Tuning the synthesis of polymetallic-doped ZIF derived materials for efficient hydrogenation of furfural to furfuryl alcohol

Cu, Co and Zn modified N-doped porous carbons (CuCo/Zn@NPC) are prepared using a polymetallic homogeneous doping and self-templating method as high performance non-noble metal catalysts for the hydrogenation of furfural (FF) to furfuryl alcohol (FAL). The CuCo/Zn@NPC-600 catalyst after treatment at 600 °C shows a superior catalytic activity with nearly 100% conversion of FF and an almost 100% selectivity of FAL using H2 at 140 °C. Meanwhile in the catalytic transfer hydrogenation (CTH) using 2-propanol as a H-donor, the conversion of FF reaches 95.8% and the selectivity of FAL is 99.1%. The results show that the Zn dopant leads to 37.3 times higher yield on the CuCo/Zn@NPC-600 catalyst than that on CuCo@NPC-600, and 2.3 times higher than that on Co/Zn@NPC-600 with Cu dopants. The efficient activity of the CuCo/Zn@NPC-600 catalyst is mainly due to the highly dispersed metal nanoparticles, the advanced porous structure resulting from Zn escape from the precursor template, and the synergistic effect between Cu and Co. Furthermore, the CuCo/Zn@NPC-600 catalyst exhibits good recyclability in FF hydrogenation in four cycle tests. The advanced synthesis method using a homogeneous doping and self-templating strategy sheds light on preparing effective catalysts for hydrogenation of biomass-based compounds.