SURFACE MODIFICATION OF SS-316 TO ENHANCE CAVITATION RESISTANCE THROUGH COMPOSITE MICROWAVE CLADS

Microwave cladding is one of the latest surface engineering techniques, which has been used to improve the surface properties of a material. This technique overcomes almost all limitations of the existing methods. In this study, Ni-based+10% Cr 3 C 2 composite clads have been developed in domestic microwave oven of 2.45-GHz frequency and 900-W power. The developed composite clads have been characterized using various standard mechanical and metallurgical techniques like SEM/EDS, XRD and Vickers microhardness tester. Cavitation erosion resistance of developed composite clads has also been examined at different parametric conditions. The microstructure analysis exhibits that the developed composite clads of 730-[Formula: see text]m thickness are free of cracks (solidification and interfacial) and less porous. The presence of various intermetallic and hard carbide phases like FeNi 3 , CrSi 2 , Cr 3 Ni 2 SiC, SiC and NiC is confirmed from the XRD analysis. The Vickers microhardness study reveals that the average microhardness of clad region is [Formula: see text] HV[Formula: see text]. The cavitation erosion study (at different parametric conditions using vibratory cavitation erosion testing) reveals that the developed composite clads perform much better under cavitation erosion environment than the SS-316 substrate. The stand-off distance is found to be the most dominating factor followed by amplitude and immersion depth.