材料科学
钙钛矿(结构)
发光
光致发光
量子产额
量子效率
激发态
发光二极管
溴化物
二极管
光电子学
结晶学
光学
无机化学
荧光
化学
物理
核物理学
作者
Ting Xiang,Ting Li,Miaosheng Wang,Wei Zhang,Mahshid Ahmadi,Xiaoyan Wu,Tianfei Xu,Meiqin Xiao,Long Xu,Ping Chen
出处
期刊:Nano Energy
[Elsevier BV]
日期:2022-01-31
卷期号:95: 107000-107000
被引量:29
标识
DOI:10.1016/j.nanoen.2022.107000
摘要
It is always difficult to control the growth of crystals during the formation of multiple quantum wells (MQWs) in the quasi-2D perovskite light emitting diodes (PeLEDs). In this study, we introduce the 1, 4, 7, 10-tetraoxacyclododecane ether into the quasi-2D perovskite of PEA2Csn-1PbnBr3n+1 to reduce the coordination rate between the phenethylamine bromide and the perovskite framework. As a result, Crown-ether assisted in-situ grown (CAIG) perovskite crystals (PCs) is grown with thick PbBr4 layers (n > 55) during the spin-coating. For the CAIG PCs, the generation of small n phases (n = 1, 2 and 3) are significantly suppressed, resulting in almost flat energy structure with the phases of n ≥ 4. The generation rate of the excited states of the n ≥ 4 remains ultra-fast within ~0.77 ps even without the MQWs structures; however the decay of excited states becomes much slower. The CAIG PCs film has lower trap density, therefore promoting the carrier mobility, carrier diffusion length and the photoluminescence quantum yield. The PeLEDs based on the CAIG PCs film achieves the maximum luminescence of ~27562 cd m−2 and the maximum external quantum efficiency (EQE) of ~16.1%. The half-lifetime of the luminescence and the EQE measured in the atmosphere (a relative humidity of ~52% at 27 ℃) are exceeding ~17 and 43 h, respectively. Hence, it can be recognized as the most ambient stable device based on the PEA2Csn-1PbnBr3n+1 perovskite.
科研通智能强力驱动
Strongly Powered by AbleSci AI