锁孔
羽流
材料科学
激光束焊接
衰减
焊接
光学
蒸发
激光器
激光束质量
吸收(声学)
梁(结构)
水蒸气
散射
瞬态(计算机编程)
衰减系数
可调谐激光吸收光谱技术
机械
激光功率缩放
热影响区
蒸汽压
光束参数积
阴影照相术
熔池
汽化
作者
Marcel Bachmann,Stephen Nugraha Putra,Fan Yang,Xiangmeng Meng,Pablo Pusbatzkies,Michael Rethmeier
摘要
In high-power laser beam welding, a common phenomenon is the formation of a keyhole caused by the rapid evaporation of the material. Under atmospheric pressure, this evaporation generates a vapor plume that interacts with the laser beam, leading to energy attenuation and scattering of the laser radiation along its path. These interactions affect the stability of the process and the overall weld quality. This study investigates the influence of the vapor plume on the weld pool and keyhole dynamics during high-power laser beam welding of AlMg3 aluminum alloy through experimental and numerical approaches. The primary goal is to identify key vapor plume characteristics, particularly its length fluctuations, and to improve the accuracy of the numerical models. To achieve this, an algorithm was developed for the automated measurement of the vapor plume length using high-speed imaging and advanced data processing techniques. The measured plume length is then used to estimate additional vapor heating and laser energy attenuation using the Beer–Lambert law. A refined numerical CFD model, incorporating 3D transient heat transfer, fluid flow, and ray tracing, was developed to evaluate the vapor plume's impact. Results show that already the time-averaged plume length effectively captures its transient influence and aligns well with experimental weld seam geometries. Additionally, energy scattering and absorption caused by the vapor plume led to a wider weld pool at the top surface. The study also shows an increased percentage of keyhole collapses due to the reduced laser power absorption at the keyhole bottom, further highlighting the importance of accurately modeling vapor plume effects.
科研通智能强力驱动
Strongly Powered by AbleSci AI