散热片
钢丝网
多孔性
材料科学
多孔介质
计算机科学
水槽(地理)
机械工程
结构工程
工程类
复合材料
地图学
地理
作者
Liu Chuanning,Jin Bin,Li Jiancheng,Gu Qinglong
出处
期刊:
[Institute of Electrical and Electronics Engineers]
日期:2025-05-17
卷期号:: 102-106
标识
DOI:10.1109/icet64964.2025.11102810
摘要
To address the heat dissipation challenges of high-power-density electronic devices, this paper proposes a copper wire mesh CPU heat sink design method based on rhombus-shaped pore optimization. A three-dimensional periodic unit model was established using COMSOL Multiphysics to systematically compare the flow and heat transfer characteristics of copper wire meshes with rhombus-shaped pores (varying internal angles) and square pores. Simulation results indicate that the rhombus-shaped pores with$60^{\circ} / 120^{\circ}$internal angles exhibit the best comprehensive performance. The sharp-angle geometry induces vortices, enhancing near-wall turbulent kinetic energy transport, thereby increasing the surface heat transfer coefficient by 2.21 % and reducing thermal resistance by 2.17 %. Meanwhile, the obtuse angles suppress flow separation, shortening the recirculation zone length, with only a 3.66 % increase in pressure drop. The study demonstrates that the geometric asymmetry of$60^{\circ} / 120^{\circ}$rhombus-shaped pores achieves synergistic optimization of heat transfer enhancement and flow resistance. The performance gains may exhibit nonlinear amplification effects in macroscopic systems, providing new insights for high-power-density heat sink design.
科研通智能强力驱动
Strongly Powered by AbleSci AI