光刻胶
再分配(选举)
计算机科学
物理
材料科学
纳米技术
图层(电子)
政治
法学
政治学
作者
Prahalad Murali,Pratik Nimbalkar,Mohanalingam Kathaperumal,Mark D. Losego,Rao Tummala,Madhavan Swaminathan
出处
期刊:
[Institute of Electrical and Electronics Engineers]
日期:2023-05-01
卷期号:: 147-151
标识
DOI:10.1109/ectc51909.2023.00033
摘要
Heterogeneous integration of chiplets requires high-density fine line/space (L/S) interconnections to enable system scaling. However, as Moore's law for transistors slows down, the dies are disaggregated based on their specific functions thereby increasing the package sizes to accommodate various dies of different functionalities. To enable a high-density redistribution layer (RDL) in the package, this paper studies the fine-line patterning capability of maskless aligner systems. The paper evaluates the smallest achievable feature size on four different thicknesses namely 5$\mu \mathrm{m}, 7 \mu \mathrm{m}, 25 \mu \mathrm{m}$and 80$\mu \mathrm{m}$of dry film photoresists (PRs). This work also investigates the effect of dose and defocus on photoresists. Two of the photoresists (5 μm and 80$\mu \mathrm{m})$are positive tone and the other 2 are negative tone. The finest L/S obtained was 1.5μm with the positive tone 5$\mu \mathrm{m}$dry film photoresist, 3$\mu \mathrm{m}$using the 7$\mu \mathrm{m}$negative tone and 20 μm using the 80 μm positive tone resist. This paper also investigates the throughput of the maskless aligners based on the dose, exposure area, and pattern density.
科研通智能强力驱动
Strongly Powered by AbleSci AI