摩擦电效应
材料科学
纳米发生器
聚偏氟乙烯
纳米纤维
图层(电子)
聚苯乙烯
电压
电荷(物理)
复合材料
光电子学
电气工程
压电
聚合物
物理
量子力学
工程类
作者
Jiahe Zheng,Cheng Lin,Jiajia Zhao,Kaibin Wang,Jinmei Liu,Nuanyang Cui,Long Gu
出处
期刊:Nanotechnology
[IOP Publishing]
日期:2024-05-03
卷期号:35 (33): 335402-335402
被引量:5
标识
DOI:10.1088/1361-6528/ad470f
摘要
The decay rate of charge in the friction layer is one of the key factors affecting the output performance of triboelectric nanogenerators (TENG). Reducing the decay rate of the triboelectric charge can increase the charge-carrying capacity of the friction layer and improve the output current and voltage of the TENG. This makes a friction generator more suitable for discontinuous driving environments. In contrast, increasing the decay rate of the charge in the friction layer can greatly improve the recovery time of the device, although it reduces the output performance of the generator. This is conducive to the application of friction generator in the field of sensors. In this study, polystyrene (PS) and carbon nanotubes (CNTs) were added to polyvinylidene fluoride (PVDF) nanofibers to adjust the charge decay time in the friction layer, thereby regulating the output performance of the friction generator and sensor. When the amount of added PS in the PVDF nanofiber reached 20%, the charge density on the friction surface increased by 1.9 times, and the charge decay time decreased by 64 times; when 0.1 wt% CNTs were added in the PVDF nanofiber, the charge decay time increased by more than 10 times. The former is more conducive to improving the power generation performance of the TENG, and the latter significantly improves the stability and repeatability of TENG-based sensors.
科研通智能强力驱动
Strongly Powered by AbleSci AI