材料科学
光电探测器
光电子学
涂层
钙钛矿(结构)
旋涂
量子点
薄膜
佩多:嘘
纳米晶
复合材料
纳米技术
化学工程
图层(电子)
工程类
作者
Phuong-Nam Tran,Ba-Duc Tran,Duy-Cuong Nguyen,Thi-Lan Nguyen,Van‐Dang Tran,Thanh–Tung Duong
出处
期刊:Crystals
[Multidisciplinary Digital Publishing Institute]
日期:2022-04-22
卷期号:12 (5): 587-587
被引量:7
标识
DOI:10.3390/cryst12050587
摘要
All-inorganic perovskite quantum dots (QDs), a promising semiconductor material, is suitable for new generation optoelectronic application. While there are many kinds of coating procedures for producing perovskite QDs peorovskite film, those methods require post-treatments and an additional dispersion support agent while still retaining pinholes and cracks. In this work, we report a facile method to produce CsPbBr3 film on a pre-patterned Pt electrode using a centrifuge coating method for photodetector (PD) application. Compact and crack-free films with ~500 nm thick from various particle sizes of 8 nm, 12 nm, and >30 nm were achieved with a suitable ratio of toluene/ethyl acetate solvent for visible light photodetector application. The optimized device has an on/off ratio of 103, detectivity of 3 × 1012 Jones, and responsivity of 6 A/W. In comparison, the on/off ratio of the device fabricated by the centrifuge coating method was 102 times higher than by the drop-coating method. The PD performance exhibited considerable moisture stability at mild high ambient temperature with no encapsulation for more than two weeks. The results suggest that this is a potential method for fabricating all inorganic perovskite nano-semiconductor films for further optoelectronic application in photodetectors, LEDs, and solar cells.
科研通智能强力驱动
Strongly Powered by AbleSci AI