接触角
单层
材料科学
粘附
相对湿度
化学气相沉积
表面能
沉积(地质)
化学工程
薄膜
湿度
基质(水族馆)
微电子机械系统
纳米技术
复合材料
古生物学
热力学
工程类
地质学
物理
海洋学
生物
沉积物
作者
T. M. Mayer,Maarten P. Boer,N. D. Shinn,Peggy J. Clews,Terry A. Michalské
出处
期刊:Journal of vacuum science & technology
[American Institute of Physics]
日期:2000-09-01
卷期号:18 (5): 2433-2440
被引量:158
摘要
We have developed a new process for applying a hydrophobic, low adhesion energy coating to microelectromechanical (MEMS) devices. Monolayer films are synthesized from tridecafluoro-1,1,2,2- tetrahydrooctyltrichlorosilane (FOTS) and water vapor in a low-pressure chemical vapor deposition process at room temperature. Film thickness is self-limiting by virtue of the inability of precursors to stick to the fluorocarbon surface of the film once it has formed. We have measured film densities of ∼3 molecules nm2 and film thickness of ∼1 nm. Films are hydrophobic, with a water contact angle >110°. We have also incorporated an in situ downstream microwave plasma cleaning process, which provides a clean, reproducible oxide surface prior to film deposition. Adhesion tests on coated and uncoated MEMS test structures demonstrate superior performance of the FOTS coatings. Cleaned, uncoated cantilever beam structures exhibit high adhesion energies in a high humidity environment. An adhesion energy of 100 mJ m−2 is observed after exposure to >90% relative humidity. Fluoroalkylsilane coated beams exhibit negligible adhesion at low humidity and ⩽20 μJ m−2 adhesion energy at >90% relative humidity. No obvious film degradation was observed for films exposed to >90% relative humidity at room temperature for ∼24 h.
科研通智能强力驱动
Strongly Powered by AbleSci AI