材料科学
多收费
共价键
电解质
离子电导率
聚合物
化学工程
阴极
溶剂化
锂(药物)
阳极
离子键合
电导率
储能
电池(电)
聚合物电解质
高分子化学
相间
有机自由基电池
沉积(地质)
纳米技术
离子
纳米颗粒
锂电池
单体
溶剂
基质(化学分析)
溶解
电极
作者
Xingchen Song,Nuo Xu,Po Bian,Yuhu Li,Genglin Lou,Guolin Sun,Jinping Zhang,Aihong Li,Yanhong Lu,Chenxi Li,Xinyi Ji,Jiajie Liang,Yong Li,Hongtao Zhang,Yongsheng Chen
摘要
ABSTRACT Polymer electrolytes are promising for high‐energy and safe lithium–metal batteries yet limited by inadequate mechanical integrity, sluggish Li + transport, and unstable electrode–electrolyte interfaces. Here, we report a covalently integrated MXene–fluorinated gel polymer electrolyte (MF‐GPE) through in situ polymerization. Acrylate‐grafted MXene nanosheets act as chemically anchored crosslinkers within a fluorinated polymer network, distinguishing from conventional physically blended composites. The covalent framework not only mechanically reinforces the polymer matrix but also regulates Li + solvation structure and lowers the activation energy for Li + transport. Consequently, the MF‐GPE enables uniform lithium deposition and constructs robust, inorganic‐rich interphases on both lithium–metal anodes and high‐voltage cathodes. It delivers an ionic conductivity of 3.3 mS cm −1 at 25°C and supports stable cycling of LiNi 0.8 Co 0.1 Mn 0.1 O 2 , LiCoO 2 and LiNi 0.5 Mn 1.5 O 4 cathodes at cut‐off voltages up to 4.9 V. Notably, a MF‐GPE based Li||LiCoO 2 pouch cell achieves cell‐level energy densities of 713.9 Wh kg −1 at 4.8 V and 605.2 Wh kg −1 at 4.6 V, maintaining stable operation over 60 cycles, while 18650 cylindrical cells operate stably for 500 cycles. Ah‐class pouch cells demonstrate outstanding safety under nail‐penetration and overcharge tests. These findings establish covalent MXene‐polymer integration to couple ion solvation structure and interphase stabilization for high‐energy, abuse‐tolerant lithium–metal batteries.
科研通智能强力驱动
Strongly Powered by AbleSci AI