Investigation of Piezoresistive Behaviors in TPMS Lattice Structures Produced with MWCNT-Reinforced PLA Filament

材料科学 压阻效应 复合材料 钻石 小旋翼机 肖氏硬度计 电阻率和电导率 抗压强度 电阻和电导 标度系数 蛋白质丝 导电体 金刚石材料性能 复合数 烧结 金刚石立方 制作 晶格常数 熔点 电导率 停留时间 格子(音乐)
作者
Mustafa Ercan Gündüz,Erkan Bahçe
出处
期刊:Polymers [Multidisciplinary Digital Publishing Institute]
卷期号:18 (19): 2449-2449
标识
DOI:10.3390/polym18192449
摘要

Although the piezoresistive behavior of conductive polymer composites has been widely studied, the geometry-dependent piezoresistive response of MWCNT/PLA-based TPMS lattice structures produced by fused filament fabrication (FFF) remains insufficiently explored. The primary objective of this study is to comparatively investigate the mechanical, thermal, electrical, and piezoresistive behaviors of Gyroid (G), Diamond (D), and Schwarz Primitive (P) TPMS lattice structures produced using the same material system, constant relative density, and XY printing orientation. For this purpose, a 2 wt.% multi-walled carbon nanotube (MWCNT)-reinforced polylactic acid (PLA) composite filament was fabricated via solvent mixing and used to produce the three TPMS topologies through FFF. Mechanical and electromechanical properties were assessed via Shore D hardness, monotonic compression tests, and in-situ electrical measurements using three independent replicate specimens for each topology (n = 3). The highest hardness was recorded for Diamond (75.6 Shore D) and the lowest for Schwarz Primitive (71.2 Shore D). At 50% compressive strain, compressive stresses were 14.164, 8.777, and 3.152 MPa for Diamond, Gyroid, and Schwarz Primitive, respectively. Specific energy absorption (SEA) values followed the same order at 9.161, 6.149, and 2.917 J g−1. Electrical conductivity and resistivity variations under loading were characterized using the four-probe method, with Diamond exhibiting the highest and Schwarz Primitive the lowest conductivity. Piezoresistive analysis showed that Diamond achieved the highest positive compressive gauge factor (GF) values of 4.74 and 2.74 at 10% and 25% strains, respectively. At 50% strain, Gyroid demonstrated superior sensitivity (GF = 1.66) over Diamond (1.57) and Schwarz Primitive (1.49). Electrical resistance exhibited a monotonic decrease with advancing compressive strain across all topologies, validating a coherent and continuous piezoresistive response under uniaxial compression. These results indicate that Diamond offers the best overall performance in mechanical strength, SEA, and low-to-medium strain sensitivity, while Gyroid is preferable for high-strain sensing. Overall, 2 wt.% MWCNT/PLA-based TPMS structures demonstrate considerable potential for piezoresistive sensor applications.

科研通智能强力驱动
Strongly Powered by AbleSci AI
科研通是完全免费的文献互助平台,具备全网最快的应助速度,最高的求助完成率。 对每一个文献求助,科研通都将尽心尽力,给求助人一个满意的交代。
实时播报
刚刚
刚刚
害羞的XM完成签到,获得积分10
刚刚
1101592875的应助被WYL采纳,获得10
刚刚
1秒前
why发布了新的文献求助10
2秒前
双儿发布了新的文献求助10
2秒前
邓少军完成签到,获得积分10
2秒前
yn107发布了新的文献求助30
2秒前
普洛望斯完成签到,获得积分10
3秒前
呆萌的晓槐完成签到,获得积分20
3秒前
JeaZ完成签到,获得积分10
3秒前
4秒前
爱猫的纭发布了新的文献求助10
5秒前
gooooood完成签到 ,获得积分10
6秒前
6秒前
huang发布了新的文献求助10
6秒前
7秒前
ding的应助被饺子采纳,获得10
8秒前
9秒前
HP完成签到 ,获得积分10
9秒前
咕噜咕噜完成签到,获得积分10
10秒前
ccc完成签到,获得积分10
10秒前
10秒前
thesky发布了新的文献求助10
10秒前
11秒前
独特思卉完成签到,获得积分10
11秒前
研友_nxejJZ完成签到,获得积分10
11秒前
爱猫的纭完成签到,获得积分10
11秒前
12秒前
13秒前
小二郎的应助被why采纳,获得10
13秒前
GGYK完成签到,获得积分10
13秒前
MiaCong发布了新的文献求助10
14秒前
14秒前
wangxin发布了新的文献求助10
14秒前
14秒前
14秒前
14秒前
拼搏路人完成签到,获得积分10
15秒前
高分求助中
(应助此贴封号)【重要!!请各用户(尤其是新用户)详细阅读】【科研通的精品贴汇总】 10000
拉伸高分子熔体中缠结行为的模拟和小角中子散射研究 1700
The World Atlas of Wine 9th edition 1000
奈特基础组织学:配套组织病理学(第4版)(Netter's Essential Histology With Correlated Histopathology) 800
八旗制度の研究 600
高分子基功能界面水蒸发材料与应用研究 500
外场增强的水汽发电研究 500
热门求助领域 (近24小时)
化学 材料科学 医学 生物 纳米技术 计算机科学 工程类 有机化学 化学工程 生物化学 物理 复合材料 内科学 催化作用 光电子学 人工智能 细胞生物学 无机化学 物理化学 数学
热门帖子
关注 科研通微信公众号,转发送积分 8187652
求助须知:如何正确求助?哪些是违规求助? 9575758
关于积分的说明 21842805
捐赠科研通 7785538
什么是DOI,文献DOI怎么找? 3435073
关于科研通互助平台的介绍 2559480
邀请新用户注册赠送积分活动 2481963