水力发电
腐蚀
水轮机
海洋工程
环境科学
航程(航空)
涡轮机
沉积物
磨损(机械)
水利工程
磨料
工程类
水力机械
淤泥
岩土工程
影响评估
不确定度分析
经验模型
混流式水轮机
水力粗糙度
近似误差
水力发电
涡轮叶片
足迹
水文学(农业)
流量(数学)
小型水电站
模型验证
作者
Sandeep Sagar,Manish Pandey,Naman Arora
出处
期刊:Research Square
日期:2026-08-24
标识
DOI:10.21203/rs.3.rs-10575752/v1
摘要
Hydro abrasive erosion in hydraulic turbines remains a significant issue that affects the durability, reliability, and efficiency of hydropower facilities, particularly those operating in rivers with high silt content. The erosion mechanisms, modelling techniques, and predicted performance of Kaplan, Francis and Pelton turbines are thoroughly evaluated in this study. The International Electrotechnical Commission 62364 (2019) model and various semi empirical formulations are evaluated in the study, and the expected outcomes are compared with field based and experimental data. For the majority of turbine components, such as blade tips, outlets, guide vanes, and runner chambers, analysis indicates that the IEC model forecasts erosion depth and spatial distribution within ± 25% of the observed values. The statistical validation results support the model's ability to accurately capture erosion behavior across a wide range of hydraulic and sediment conditions. The strong correlation (CC = 0.997, R² ≈ 0.994) indicates a close fit between predicted and observed data. Validation against the IEC 62364:2019 standard further showed that 83% of observations fell within the ± 25% error band, with negligible systematic bias supporting the model's overall reliability. More sustainable and effective hydropower generation in sediment rich areas is made possible by the IEC 62364 framework, which, provides a trustworthy tool for evaluating and reducing hydro abrasive wear in turbines.
科研通智能强力驱动
Strongly Powered by AbleSci AI