棒
断裂(地质)
结构工程
材料科学
极限抗拉强度
灵敏度(控制系统)
撞车
应变率
拉伤
拉伸试验
复合材料
计算机科学
工程类
病理
替代医学
程序设计语言
内科学
医学
电子工程
作者
Jovan Trajkovski,Robert Kunc
出处
期刊:Materials
[Multidisciplinary Digital Publishing Institute]
日期:2024-12-20
卷期号:17 (24): 6228-6228
被引量:2
摘要
Bolt connections are widely used in construction and engineering to securely join structural elements. These connections are essential for distributing loads across components and ensuring that structures can withstand external forces. The planned failure of these bolts is of great importance in steel safety barriers (SSBs), as it can directly influence the height of the guardrail and the working width of the SSB during the vehicle impact, which consequently affects the crash consequences. Therefore, it is of great importance to determine the bolt response until fractures under different strain rates. For that purpose, experimental tensile tests of low-strength steel rods of grade 4.6 were conducted at various strain rates (0.0025–25 s−1) until fracture. Test specimens were photographed during the testing, and by means of image processing, input data for calculation of true stresses and strains up to the point of fracture were extracted. Based on the experimental data, material parameters were determined for the Cowper–Symonds model, enabling precise numerical simulations of these connections at various strain rates. A validation study was also performed successfully.
科研通智能强力驱动
Strongly Powered by AbleSci AI