材料科学
气凝胶
超临界干燥
抗弯强度
复合材料
超临界流体
物理吸附
多孔性
相(物质)
脆性
介孔二氧化硅
抗压强度
吸附
比表面积
介孔材料
热的
化学工程
甲基三甲氧基硅烷
机械强度
工作(物理)
热稳定性
多孔介质
分离过程
疏水二氧化硅
表面改性
作者
Hainan Ma,Baomin Wang,Yongjun Zhang,Liquan Zheng
出处
期刊:Gels
[Multidisciplinary Digital Publishing Institute]
日期:2025-10-30
卷期号:11 (11): 870-870
被引量:1
摘要
Silica aerogels are highly attractive due to their outstanding properties, including their low density, ultralow thermal conductivity, large porosity, high optical transparency, and strong sorption activity. However, their inherent brittleness has limited widespread applications. Constructing a robust, highly porous three-dimensional network is critical to achieving the desired mechanical properties in aerogels. In this study, we introduce a novel synthesis route for fabricating lightweight and mechanically strong aerogels by incorporating poly(ethylene-co-vinyl alcohol) (EVOH) through thermally induced phase separation (TIPS). EVOH exhibits upper critical solution temperature (UCST) behavior in a mixture of isopropanol (IPA) and water, which can be utilized to reinforce the silica skeletal structure. Robust aerogels were prepared via the sol–gel process and TIPS method, followed by supercritical CO2 drying, yielding samples with bulk densities ranging from 0.136 to 0.200 g/cm3. N2 physisorption analysis revealed a mesoporous structure, with the specific surface area decreasing from 874 to 401 m2/g as EVOH content increased from 0 to 80 mg/mL. The introduced EVOH significantly enhanced mechanical performance, raising the flexural strength and compressive strength to 0.545 MPa and 18.37 MPa, respectively—far exceeding those of pure silica aerogel (0.098 MPa and 0.74 MPa). This work demonstrates the effectiveness of the TIPS strategy for developing high-strength, low-density silica aerogels with well-preserved porosity.
科研通智能强力驱动
Strongly Powered by AbleSci AI