微波食品加热
材料科学
传质
含水量
水分
真空干燥
传热
热力学
复合材料
强度(物理)
分析化学(期刊)
化学
冷冻干燥
色谱法
光学
物理
岩土工程
量子力学
工程类
作者
Ying Zhou,Yongfu Liu,Qiang Li,Wenyan Fan,Xiaoli Pan,Wangxin Yu
摘要
Microwave vacuum drying of pineapple slices was carried out to investigate the microwave power degree on the drying kinetics and heat mass transfer characteristics. Numerical simulation and bench test were used to study the variation characteristic of microwave volumetric heating and temperature and moisture during the drying process, and the best drying model was selected. The result shows that the drying process of the pineapple slices belonged to the falling rate period without constant drying stage; Among 6 common thin layer drying kinetic models, the mean values of R2 were maximum, χ2 and RMSE for the Two-term exponential model were minimum, which were 0.9993, 0.000107 and 0.00839, respectively. As the temperature rose to 40∼45∘C at the late stage of drying, the thermal runaway phenomenon appeared, and the internal temperature of pineapple slices rose sharply. Hot spots appeared at the center and edge of pineapple at the late stage of drying, and it generated by microwave volumetric heating focusing. The predicted values of moisture ratio (MR) obtained from COMSOL simulation showed good consistency with the Two-term exponential model and the experimental. In order to improve the drying quality of the pineapple, the microwave power should be varied and reasonable interval to make the drying temperature lower than the thermal runaway temperature range.
科研通智能强力驱动
Strongly Powered by AbleSci AI