Biomechanical comparison of proximal, distal, and anatomic tibial tunnel for transtibial posterior cruciate ligament reconstruction

No consensus has been reached on the optimal position of PCL tibial tunnel. The purpose of this study was to compare the biomechanical properties of proximal, distal and anatomic tibial tunnel in transtibial posterior cruciate ligament reconstruction. An in-vitro model of transtibial posterior cruciate ligament reconstruction was simulated using porcine tibias and bovine extensor tendons. Two models of biomechanical testing, load-to-failure loading, and cyclic loading, were performed in this study. The load-to-failure loading found that distal tibial tunnel resulted in greater ultimate load and yield load than the anatomic and proximal tunnel group (p < 0.05), whereas there were no significant differences in mean tensile stiffness among three groups (p > 0.05). The cyclic loading found no differences in the graft displacement at 250, 500, and 1000 cycles among three groups (p > 0.05). It was found that distal tibial tunnel showed superior ultimate load and yield load in load-to-failure loading testing compared with proximal and anatomic tibial tunnels, whereas no significant difference was found in terms of the mean displacement of the survived grafts in cyclic loading testing among three groups.