材料科学
球磨机
烧结
离子电导率
电解质
快离子导体
硫化物
电导率
化学工程
锂(药物)
化学
冶金
电极
物理化学
工程类
内分泌学
医学
作者
Rasu Muruganantham,Cheng‐Yi Lin,Hsin‐Wei Wu,Duncan H. Gregory,Wei‐Ren Liu
标识
DOI:10.1016/j.jtice.2022.104446
摘要
• Li 7 P 3 S 11 is synthesized by a facile ball-milling followed a vacuum sintering technique. • The phase purity of the sulfide is optimized by controlling the ball-milling time and subsequent sintering temperature. • Ball-milling for 4 h and sintering at 250 °C yieled the highest sample ionic conductivity 1.14 × 10 −3 Scm −1 among those tested materials. • Li stripping/plating performance is evaluated by different sizes of Li-electrodes and different types of solid-state cell design. Sulfide-based materials are promising solid electrolytes for Li-based metal-ion batteries, owing to the high ionic conductivity, low-cost and non-toxic. In this study, we fabricate and optimize a Li 7 P 3 S 11 solid electrolyte for all-solid-state rechargeable batteries through both new approaches in material processing and cell design. The sulfide itself is prepared by a ball-mill-vacuum sealing process to yield superior electrolytes. A systematic investigation of the synthetic parameters, including milling time, sintering temperature, and sintering time, lead to optimal synthesis conditions of ball-milling for 20 h and vacuum sintering at 250 °C for 4 h. The resulting material exhibits a high ionic conductivity of 1.14 × 10 −3 S/cm at room temperature and consists of 50% P 2 S 7 4− , a notably higher amount of the polyanion than samples prepared under alternative conditions. Two types of solid-state storage systems (SSSS) were designed comparing symmetric cells containing Li-metal electrodes with equivalent cells of composite electrodes Li/Li 7 P 3 S 11 (LiLPS). The relative Li-stripping/plating behavior and cycle capability over 200 cycles were tested. Whereas the symmetric Li-electrodes exhibit an interfacial resistance of 650 Ω, this value decreases remarkably to 430 Ω in the LiLPS composite electrode cell. These findings demonstrate a highly effective strategy to enhance the electrochemical stability and performance of sulfide solid electrolytes towards their suitability for all-solid-state batteries. Such a strategy could be successfully extended to other all-solid-state cell architectures.
科研通智能强力驱动
Strongly Powered by AbleSci AI