重力仪
隔振
隔离器
振动
有效载荷(计算)
声学
地震计
螺旋弹簧
音圈
加速度计
信号(编程语言)
检波器
工程类
物理
干涉测量
计算机科学
电磁线圈
电气工程
光学
结构工程
弹簧(装置)
量子力学
土木工程
网络数据包
计算机网络
程序设计语言
作者
Jiamin Yao,Wei Zhuang,Jinyang Feng,Yang Chun Zhao,Shaokai Wang,Shuqing Wu,Fang Fang,Tianchu Li
出处
期刊:
日期:2021-11-01
被引量:1
标识
DOI:10.1115/imece2021-68008
摘要
Abstract Absolute gravimeters have been widely used as an important instrument in geological exploration and geophysics. To achieve a required measurement precision, it is necessary to integrate a vertical vibration isolator with ultra-low resonance frequency into the gravimeter. In this paper, an active vibration isolator designed on the basis of a BM-10 passive vibration isolation platform is presented. In the isolator, a seismometer placed next to the payload on the same plate outputs a voltage signal proportional to the payload’s velocity. According to this signal, a feedback circuit based on a PID controller controls two identical voice coil actuators to drive the platform synchronously. In this way, the vibration of the payload is suppressed. The BM-10 platform has 6-DOF passive vibration isolation originally, but its horizontal vibration isolation is proved unnecessary or even harmful in absolute gravimetry. Hence, two linear bushings are applied as a horizontal constraint to ensure that the payload only moves vertically in a straight line. Experiments show the resonance period of the isolator reaches approximately 88 s. In addition, the active vibration isolator has shown a much better performance for vibrations at low frequency than the passive isolator. In the future, the vibration isolator will be improved and then be integrated in the NIM-AGRb-1 atom-interferometry absolute gravimeter for the evaluation of its performance.
科研通智能强力驱动
Strongly Powered by AbleSci AI