Seakeeping characteristics of intact and damaged ship in the Adriatic Sea
作者
I. Martić, N. Degiuli & I. Ćatipović
标识
DOI:10.1201/b18855-24
摘要
Sloshing inside the tank can be initiated by incoming waves i.e. the ship motions in waves and it may cause significant load on tank walls. It also affects the global ship motions.Effect of sloshing inside the tanks is often linearized in ship motion analysis. It is necessary to satisfy the Laplace equation and boundary condition on tank walls in order to approximate sloshing by using the linear potential theory. If the tank is equipped with slosh-supressing devices, the fluid motions can be quite accurately modelled by using linear theories (Gavrilyuk et al. 2005). In certain frequency range, significant nonlinearity can occur caused by coupling of tank liquid and ship motions (Li et al. 2014). There are two approaches to solve sloshing hydrodynamic problem: in frequency domain based on the linear potential flow theory and in time domain based on the non-linear viscous flow theory (Li et al. 2014). Fluid motions inside the tank generate severe hydrodynamic loads that can violate structural integrity and stability and put in danger the whole ship. The ship motions affected by the coupling are the surge, sway, roll and yaw motions (Diebold et al. 2008).