Power system stabilization control based on the wide area phasor measurement

Abstract This paper presents a method of tuning power system stabilizers (PSS) in order to damp low‐frequency oscillations in a multimachine power system based on wide area phasor measurements. The authors have developed a method for detecting interarea low‐frequency modes from measured small oscillations associated with load fluctuations by approximating the oscillations as a coupled vibration model. In this paper, the coupled vibration model is extended to include the effect of PSS. PSS are tuned directly by using the extended model, since the model includes parameters of PSS. The advantage of this method is that steady state phasor fluctuations are available for tuning PSS and assessing the effect of the tuning control. That is, a large disturbance like a line fault is not necessary since the stability of major modes can be investigated directly by using eigenvalues of the extended model. The identification process does not require information on the input to the system for perturbation. Some numerical analyses demonstrate the effectiveness of the method by using phasor dynamical data obtained by a power system simulation package. © 2008 Wiley Periodicals, Inc. Electr Eng Jpn, 163(1): 16–24, 2008; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20640