电解质
法拉第效率
水溶液
锌
成核
阳极
化学
电化学
化学工程
材料科学
无机化学
电极
有机化学
物理化学
工程类
作者
Teshome Assefa Nigatu,Hailemariam Kassa Bezabh,Bereket Woldegbreal Taklu,Bizualem Wakuma Olbasa,Yu‐Ting Weng,She‐Huang Wu,Wei-Nien Joe Su,Chun‐Chen Yang,Bing‐Joe Hwang
标识
DOI:10.1016/j.jpowsour.2021.230413
摘要
Aqueous zinc batteries are the frontiers in electrochemical energy–storing devices due to their environmental friendlies, excellent safety, and low-cost nature. However, dendrite growth, gas generation and, limited cycling life are the bottlenecks for aqueous zinc batteries’ practical use. Here, we engineered a water-in-bisalt electrolyte with a hydrogen-bond rich additive 1,2- dimethoxy ethane (DME), which synergistically reduces free water activity and improves the electrochemical performance of aqueous lithium – zinc hybrid batteries. As a result, the Zn||Cu half-cell exhibits 99.43% average coulombic efficiency (ACE) at 0.5 mA cm−2 after 200 cycles using DME additive. Molecular Dynamics (MD) simulation, FTIR, Raman, and NMR confirm the significant decrease of water activity via the synergetic effect of water-in-bisalt electrolyte and the hydrogen-bond rich additive (DME). Interestingly, the synergetic effect improves zinc nucleation and growth on the surface of the anode and forms homogeneous, dense and smooth zinc deposition. In contrast, the ACE of the non-DME-containing electrolyte is 99.25%., at the same condition, The Zn||LFP full cell with the DME additive gives a CE higher than 99.3% and the capacity retention of 99.49% after 100 cycles at 91 mAg−1 compared to almost no capacity in the absence of DME after 35 cycles.
科研通智能强力驱动
Strongly Powered by AbleSci AI