this paper reported the effect of SiO2on the silicon-on-glass anodic bonding theoretically and experimentally for the first time. Silicon glass bonding mechanism based on soft break-down of SiO2is established and demonstrated. The electrical model of Si-SiO2-Glass anodic bonding stated clearly that anodic bonding voltage must be higher than the break-down voltage of SiO2to start bonding. The break-down voltage of SiO2is proportional to its thickness. Bonding strength is finally extracted by a customized on-chip testing device. It is found that the thin SiO2layer on the silicon surface affects the bonding strength seriously. The bonding strength of anodic bonding with SiO2layer is 25% stronger than that of typical Si-Glass anodic bonding near the periphery of the silicon wafer, and 8% stronger than that of typical Si-Glass anodic bonding in the central region of the silicon wafer.