极紫外光刻
极端紫外线
平版印刷术
抵抗
材料科学
灵敏度(控制系统)
光学
数值孔径
表面粗糙度
分辨率(逻辑)
GSM演进的增强数据速率
紫外线
表面光洁度
光电子学
计算机科学
纳米技术
物理
电子工程
人工智能
工程类
复合材料
波长
激光器
图层(电子)
作者
Kazuki Azumagawa,Takahiro Kozawa
出处
期刊:
[SPIE]
日期:2020-03-23
卷期号:: 76-76
被引量:1
摘要
High-volume production of semiconductor devices by extreme ultraviolet (EUV) lithography has started since 2019. A high numerical aperture tool is planned to extend the use of EUV lithography. The trade-off relationships between resolution, line edge roughness (LER), and sensitivity are a significant concern for the extendability of EUV lithography. In previous study, the dependences of chemical gradient (an indicator of LER) on the half-pitch of line-and-space patterns, the sensitivity, the sensitizer concentration, and the effective reaction radius for deprotection were investigated using a simulation on the basis of the sensitization and reaction mechanisms of chemically amplified EUV resists. Although the relationships between resolution, LER, and sensitivity were formulated in the half-pitch range lager than 10 nm, they were deviated from the equations in the sub-10 nm half-pitch resolution region. Recently, the application of information science to the material engineering has attracted much attention. In this study, the feasibility of the application of machine learning to the analysis of trade-off relationships was investigated. The sub-10 nm region was fitted well using lasso.
科研通智能强力驱动
Strongly Powered by AbleSci AI