Gaby J. M. Janssen,Astrid Gutjahr,Lambert J. Geerligs,Ingrid G. Romijn,Evert E. Bende,Yongjin Wu,John N. van den Anker,Maciej K. Stodolny,Jan Marc Luchies,Martijn Lenes,Emine Hande Çiftpınar
This paper presents progress by ECN and Tempress in developing and integrating processing of polysilicon passivating contacts aimed at use for low-cost industrial cell production.The polysilicon ("poly") is deposited by low pressure chemical vapour deposition (LPCVD), and we present results with in-situ as well as ex-situ doping processes.We demonstrate synergy and compatibility with industrial cell processing; for example applying hydrogenation from silicon nitride coating layers, and metallization by screen printed fire-through paste.We analyze the relation between surface recombination current prefactor J o and the processing of the polysilicon.For n-type poly ("n-poly") we obtain J o down to ~0.8 fA/cm2 and ~3 fA/cm2 on planar and textured surface, respectively; for p-poly J o down to ~6 fA/cm2 on planar surface (results on textured surface are pending).We have fabricated 6 inch screen printed bifacial n-type cells with a diffused boron emitter and an n-poly back contact (called PERPoly cell), with an efficiency of 20.9%, representing an industrially relevant application of the polysilicon technology.In the presentation we will also consider other variations of cSi cells with poly passivating contacts.